Whole House Water Filters: Safe & Clean Water for Your Entire Household


Water is the source of life, but if your water is contaminated, it might as well be the source of death. Water purification is a practice employed in most households. Filtering the water of sediments, impurities, and bacteria is vital for a healthy household, especially if you intend to use your water for drinking. There are a variety of water filters available in todays technological age, but by far the most popular are whole house water filters. A majority of todays whole house water purification systemscan remove chlorine and a variety of other chemicals. Biological contaminants, however, require additional filters attached to the faucet or an extra treatment or filtering device.

Whole House Water Filtration: How to Choose Your Filtration Systems

Whole house water filters ingeniously attach to your main water supply to filter the water supply that comes into your house. However, not all filtration systems are created equal, and selecting the appropriate one for your house depends on the type of you water you have.

  • Know More About Your Water

The best whole house water filter works best with the type of water you have at home. In order to select the purification system that’s right for you, you need to know about what’s in your water. List down what minerals, sediments, or chemicals are present in your water supply. Does your water contain chloride, iron, sand or calcium? If sand is in your water, it might jam into the water screen in the washer. If your toilet or bathtub has orange stains, your water may have an excessive amount of iron. White deposits on your sink and faucet are tell-tale sites of calcium, and if your water smells like a couple of spoiled eggs, theres a huge chance it contains hydrogen sulfide.

  • Have Your Water Tested

One good way to know what whole house water filters are right for you is to have your water tested. If your source of water is public or municipal, request your local water plant to conduct an analysis. If your source of water is private well water, collect a sample and have it tested by a nearby laboratory. You can also try hiring a water tester to do this job for you, or you can do it yourself by purchasing a water testing kit that you can find in a home supply store.

  • Locate Your Main Water Line

Whole house water filters come in different sizes, so you need to see how much space you have available around your line. A variety of whole house water filters are encased in bodies that have large diameters. It is highly essential that you measure the space that you have available around your main water line in order to determine the size of the filter system you’re going to choose.

  • Determine the Flow Rate

Different whole house purification systems have different flow rates. A systems flow rate is measured via GPM or gallons per minute. GPM is the unit used to determine the speed of which the water flows into the household after it has been treated or filtered. The flow rate of your system should depend on the size of your house. Your GPM will also be determined by the amount of water flow that your dishwasher, toilets, or shower heads need.

  • Choose the Model that Best Suits Your Household

Visit a local home improvement store and select from the array of whole house water filters using the information that you have collected. You can also try reading whole house water filter reviews to guide you in your purchasing decision. Remember, an expensive water filter system does not necessarily mean its better than more affordable ones, so be wise on your selection.